www.saeco.com/support
Press the
button to turn on the machine.
Nacisnąć przycisk
, aby włączyć urządzenie.
Place a container under the steam wand.
Ustawić pojemnik pod rurką wylotu pary.
When the process is com-
Thereafter place the contai-
pleted the machine starts
ner under the coff ee dispen-
warming up.
sing spout.
Po zakończeniu operacji
Po zakończeniu nagrzewa-
urządzenie rozpoczyna fazę
nia należy ustawić pojem-
nagrzewania.
nik pod dozownikiem.
Note: If you keep the button
pressed for more than 8 seconds the machine en-
ters the demo mode. To exit unplug the power cord and turn the machine on again.
Uwaga: Wciśnięcie przycisku
urządzenie przełącza się na tryb demo. Aby wyjść z trybu demo, należy odłączyć
kabel zasilający i ponownie uruchomić urządzenie.
Press the
button to start priming the circuit.
Nacisnąć przycisk
, aby rozpocząć cykl napełniania obwodu.
The machine performs an
The machine is ready for the
automatic rinsing cycle.
manual rinse cycle.
Urządzenie wykonuje auto-
Urządzenie jest gotowe do
matyczny cykl płukania.
cyklu ręcznego płukania.
Instructions
Instrukcja obsługi
przez dłużej niż osiem sekund powoduje, że
11