Advertisement
audio.
6.
ARC LED: This red LED illuminate when the ARC fuction open.
7.
IR : Remote control receiver,the 3.5mm phone for HDMI switcher IR extend.
8.
INPUT BUTTON:Press this button to select the input source.
9.
EDID BUTTON: Press this button to select the 2.0CH,5.1CH,7.1CH,Auto audio EDID mode.
10.
ARC BUTTON：Press this button to open or close the ARC fuction.
ARC fuciton : If you need use ARC,your HDTV must support this fuction, When you open the ARC
fuciton,the Toslink of the Switcher will output the HDTV current display content audio. Otherwise
will output the Switcher input source audio.
11.
RST BUTTON: Press this button the switcher will reset to factory state(INPUT1, Auto EDID
MODE,ARC FUCTION CLOSED)
Advertisement
