Sub Frame - Subaru IMPREZA 2004 Service Manual

8. Sub Frame

A: REMOVAL
1) Lift-up the vehicle.
2) Remove the under cover.
3) Remove the bolt cover.
4) Remove the clip.
5) Remove the sub frame.
NOTE:
Loosen bolt (1) and leave a few threads caught,
then remove the bolts in the order of (2), (3), (4),
(5), and (6).
(6)
(6)
(5)
(4)
(3)
(2)
(4) Only for STi
Sub Frame
FS-00080
FS-00081
(5)
(4)
(3)
(2)
(1)
(1)
FS-00082
FS-25
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Replace the M12 bolt with a new one.
Tightening torque:
T1: 34 N·m (3.5 kgf-m, 25 ft-lb)
T2: 55 N·m (5.6 kgf-m, 41 ft-lb)
T3: 70 N·m (7.1 kgf-m, 52 ft-lb)
T4: 95 N·m (9.7 kgf-m, 70 ft-lb)
(2)
(1)
T2
T1
T2
(1)
(2)
(1) M8 bolt
(2) M12 bolt (with wax)
(3) M12 bolt (with oil)
(4) M10 bolt
(5) M12 bolt (Only for STi)
FRONT SUSPENSION
(5)
(3)
(4)
(4) T3
T4
T4
(4) T3
(4)
(3)
(5)
FS-00098