Set Password - Bush IDLCD2211HDV Instruction Manual

If you forget your private password, the super password is "1225", this will always unlock your TV.
Press the NUMBER button s on the remote control to set the new password. When the new password has been input
twice, the password is set. The TV will go back to the previous menu.

Set Password

Press the button to see the Set Password submenu. Press the NUMBER button to enter the new password.
Program Blocked
(In TV, DTV mode)
the GREEN button to lock
Press
(In DTV mode)
Parent Lock
You can rate and lock programmes based on the censor age ratings.
NOTE: When you select "default factory setting" the Lock Setting won t change.
Press the INPUT button to display the Source Menu, then press
adjust the relative settings.
On Source
Set the default signal source by pressing the
(The default signal source will be displayed when the TV
turns on.) Optional signal sources are as follows: DTV,
TV, Component, PC-RGB, HDMI, AV and S-Video.
On Channel
Set the default channel by pressing
(The default channel will be displayed when the TV turns on).
On Volume
Set the default volume by pressing
(The default volume is the volume when the TV turns on. Remember the default volume should be less than the maximum
volume).
Volume Max.
Set max volume by pressing the
volume is the priority.
Hotel Mode Enable
Set the otel
ode ON/OFF by pressing the
H M
the hotel mode is enabled. The TV will automatically enter into hotel mode when turns on next time.
NOTE:
When "HOTEL MODE" is "ON", the tuning and list function is locked.
When you select "default factory setting" the Hotel Setting won
the available program you want.
Program Blocked
TV DTV Radio
- -
1 S 02 1 S 02
TV
- -
2 C 42 2 C 42
TV
- -
3 C 44 3 C 44
TV
EXIT
LOCK
EXIT
Hotel Mode
or
the / buttons
the / buttons
/ buttons. When the max volume is lower than the default volume, the max
/ buttons. When it is "ON" and switch off at the AC power supply,
-18-
s
Press the GREEN button again to unlock it.
. .
Frequency 85 25MHz Frequency 85 25MHz
ENTER
EXIT
,
1 4
7 0
in turn to enter into the Hotel Mode to
On Source
buttons.
On Channel
On Volume
Volume Max.
Hotel Mode Enable
EXIT
EXIT
,
t change.
OPERATION
Hotel Option
DTV
0
30
70
On