Table of Contents
Advertisement
Getting Started
Initial set up
When turned on for the first time, language selection
message is displayed (fig.1). Press the "
" button to highlight the required language, press OK
button to select. "First Time Installation" appears. Use"
" or " " button to set the required country, and press
"
" button to select "Teletext Language". Use "
"
" button to set the "Teletext Language" and select
"Scan Encrypted" using "
Encrypted" using "
Press OK button on the remote control to continue and the
confirmation screen will be displayed on the screen (fig.3).To
start automatic select Yes (to cancel select No), highlight
the item required using the " " or "
OK button to select. The search will start (fig.4).
IMPORTANT: Do not turn off the TV while
"First Time Installation" is in operation.
After all the available stations are stored, Channel List
will be displayed on the screen. If LCN (*) is available in
your country, a message appears on the screen which
asks you if you want to sort the channels according to
LCN. In some countries, the order of the channels is
arranged automatically by the broadcaster. This is called
logical channel number (LCN). If the selected country
has LCN support, the channels will be enumerated one
by one, beginning from number 1. You cannot move
any programme to a position after the last saved one.
If you try to do this, both programmes will change their
places. If LCN support is not available, you can move
the channels as you wish.
Press OK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence.
Source Selection
Press the SOURCE button on the remote control for
switching between the sources.
Information Banner
Whenever you change channel using the P-/P+ buttons
or the numeric buttons, the TV displays the broadcast
picture along with an information banner at the bottom
of the screen. The information banner can be displayed
at any time while watching TV by pressing the INFO
button on the remote control (fig.5).
Hint: Not all channels broadcast the programme data. If
the name and time of the programme are not available,
then information banner will be displayed with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). "Enter PIN" will be displayed on
the screen in such a case.
14
For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
" or "
" or "
" button. Set "Scan
" or "
" button (fig.2).
" button and press
" or
(fig.1)
(fig.2)
(fig.3)
(fig.4)
(fig.5)
Advertisement
Table of Contents
