Table of Contents
Advertisement
Section 2:Installation
Overview
Your Ethernet Adapter inserts into an unused PCI slot inside your computer.
Because your Ethernet Adapter supports both 10BaseT and 100BaseT (also known as Fast
Ethernet), no additional hardware or software is required to work with different network
segments.
Installing Your Ethernet Adapter
To install your adapter card:
1
Insert the supplied Ethernet Adapter CD-ROM into the CD-ROM drive of your computer.
The software automatically starts the Installation Wizard program
2
Follow the prompts to set up your adapter card.
If Windows 98SE prompts you for the original Windows CD-ROM, insert the CD-ROM,
and direct Windows to its proper location (for example, D:\WIN98).
3
When prompted, power down the PC, and then unplug the electrical connection to
install the adapter card.
4
Using the instructions you received with your desktop PC, remove the cover from your
desktop PC. Ground yourself by touching the metal chassis.
5
Locate an empty PCI slot in your desktop PC.
1
Note: If the Windows set up wizard does not start automatically, do the following: Click Start, then Run. On the next
window, click Browse and locate your CD-ROM drive. Locate Launch.exe and highlight it. Click Open, then OK. The set
up wizard starts.
LPCI810
1
.
PAGE 4
Advertisement
Table of Contents
