Temperature Switch Monitor; Operating The Refrigerator Controls; Control Panel - Norcold NX64 Series Owner's Manual

Hide thumbs Also See for NX64 Series:
Table of Contents

Advertisement

Available languages

Available languages

- When you push the TEMP SET button, the temperature setting flashes in the
center display for ten seconds.
- The backup operating system can overfreeze or thaw the contents of the freezer
and the fresh food compartment.
- Make sure the temperatures of the freezer and the fresh food compartment are
satisfactory.

Temperature switch monitor:

The refrigerator is equipped with a temperature switch [142] for overheating protection
(See Art01869) . A Norcold authorized service technician can determine if this switch
has been triggered.
If you open the door(s) too often, the temperatures inside the freezer
NOTICE
and fresh food compartment do not become stable. Allow the
refrigerator to operate for about one hour after each adjustment change
before you examine the contents. The number "9" is the coldest
temperature setting.
- If the temperature is too warm, push and hold the TEMP SET button to raise the
temperature setting by one number.
- If the temperature is too cold, push and hold the TEMP SET button to lower the temperature setting by one number.
- Have the refrigerator serviced by your dealer or a Norcold authorized Service Center as soon as possible.

Operating the Refrigerator Controls

Control panel:

The refrigerator control panel (See Art02397) is between the freezer compartment and the fresh food compartment. A 12 volt DC power
supply is necessary for the control functions of the refrigerator to operate. The refrigerator receives DC power from the 12 volt system of
the vehicle; either an auxiliary battery, a converter, or the vehicle engine battery.
The POWER ON/OFF button [30] starts and shuts down the refrigerator.
- Push and release the POWER ON/OFF button [30] to turn on the refrigerator.
- Push and hold the POWER ON/OFF button [30] for one second to turn off the refrigerator.
The MODE button [31] changes the modes of operation of the refrigerator.
- Push and hold the MODE button [31] to scroll through the available operation modes of the refrigerator, one after the other (See
Art02397).
- When the desired mode indicator comes on, release the MODE button.
30
31
278
280
32
Art01869
NORCOLD
Owner's Manual 7
142
Art02397

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx64im seriesNx84 seriesNx84im series

Table of Contents