Emerson Portland CF965BS00 Owner's Manual page 17

6. Installation of Downlight
WARNING
!
To avoid risk of burns or other injuries, turn power off
and allow lamp to fully cool before attempting to replace
the mini-halogen base bulbs.
6.9
Screw the three 50-watt (maximum) mini-halogen base
bulbs (supplied) in the light kit fixture sockets
NOTE: Do not touch the halogen mini-halogen base
(Figure 26).
bulbs with bare hands. Fingerprints may result in
shorter bulb life. Remove fingerprints with rubbing
alcohol.
6.10
Place the glass shade into the opening in the light kit
assembly, aligning the three flat areas on the top edge of
the glass with the three raised dimples on the light kit
assembly and turn the glass shade clockwise until it is fully
NOTE: Periodically check that the glass shade is
seated (Figure 27).
seated fully clockwise in the light kit assembly.
(Continued)
LIGHT KIT ASSEMBLY
Figure 26
GLASS SHADE
Figure 27
Please contact 1-800-654-3545 for further assistance
17
LIGHT KIT FIXTURE
SOCKETS (3)
50-WATT (maximum) MINI-HALOGEN
BASE BULBS (3)
emersonfans.com
ETL Model No.: CF965