Table of Contents
Advertisement
6.2.4
STEERING CABLES
The machine is turned by the
rear set of wheels. A set of
cables between the steering
wheel and the rear axle as-
sembly control the position of
the wheel angle. To maintain
the steering cables, follow this
procedure:
1. Stop engine, engage park
brake and remove ignition
key before dismounting.
2. Check the play in the
steering system by turn-
ing the steering gently
from side-to-side up to the
resistance point.
3. The wheel should not be
able to turn without mov-
ing the rear axle assem-
bly.
4. Tighten the steering
cables to snug up the
system and remove any
looseness. Do not over-
tighten.
Fig. 38 STEERING SYSTEM
Steering Wheel
Cables
43
Advertisement
Table of Contents
