Table of Contents
Advertisement
5. Starting Machine:
a. Engage park brake.
c. Close the choke if the
engine is cold.
d. Move the throttle to its
1/4 throttle position.
e. Use the ignition switch
on the front frame to
start the engine.
f.
Run the engine for a
few minutes to allow it
to warm.
g. Gradually open the
choke.
h. Increase throttle setting
to maximum speed for operation.
i.
Start push vehicle engine to start work-
ing.
6. Use the rotary switch to set the position of
the center duct.
7. Stopping:
a. Stop forward movement.
b. Slow engine RPM.
c. Stop engine.
d. Set park brake.
e. Remove ignition key before dismounting.
8. Emergency Stopping
Turn engine off to stop machine if an emer-
gency arises. Correct emergency condition
before resuming work. Always engage
park brake before restarting engine.
Fig. 12 IGNITION SWITCH
Fig. 13 STARTING/STOPPING
25
Advertisement
Table of Contents
