5.6
FIELD OPERATION
•
Please remember it is important that you
read and heed the safety signs on the
Blower. Clean or replace all safety signs if
they cannot be clearly read and understood.
•
If a safety shield or guard is removed for
any reason, it must be replaced before the
machine is again operated.
•
Always use two people to handle heavy, un-
wieldy components during assembly, installa-
tion, removal or moving.
•
Always engage the park brake when stop-
ping engine to prevent machine move-
ment when restarting engine.
•
Place all controls in neutral, stop engine,
set park brake, remove ignition key and wait
for all moving parts to stop before servicing,
adjusting, repairing or unplugging.
•
Do not allow riders on the machine at any
time. There is no safe place for any riders.
Although the Self-Propelled
Blower is easy to use, each
operator should review this
section to familiarize him-
self with the detailed safety
and operating procedures.
When using the machine,
follow this procedure:
1. Clear the area of
bystanders, especially
small children.
2. Review and follow the
Pre-Operation Check-
list (see Section 5.4).
3. Transport to the work-
ing area (refer to Sec-
tion 5.7).
24
OPERATING SAFETY
Fig. 11 TRANSPORTING
•
Do not allow anyone who is not familiar with
the safety rules and operation instructions to
use this machine.
•
Never allow children to operate or be around
this machine.
•
Clear the work area of objects which might
be picked up and snagged or entangled in
the machine.
•
Do not reach into blower openings when the
engine is running. Keep others away also.
•
Keep hands, feet, hair, jewelry, and clothing
away from all moving and/or rotating parts.
•
Do not direct the air stream toward people,
animals or buildings to prevent injury or
damage. Do not place hands, feet or other
body parts into air stream.
•
Do not run engine in an enclosed area.
Exhaust fumes contain carbon monoxide, an
odorless and deadly poison.