Table of Contents
Advertisement
ANTI-TILT BRACKET
Important!
To restrain the appliance and prevent it tipping accidentally, fit the supplied bracket
to the rear wall to fix it securely.
To fit the anti-tilt bracket:
1.
After you have located where the cooker is to be positioned, mark on the wall the place
where the two screws of the anti-tilt bracket have to be fitted.
Please follow the indications given in fig. 8.8.
2.
Drill two 8 mm diameter holes in the wall and insert the plastic plugs supplied.
Important!
Before drilling the holes, check that you will not damage any pipes or electrical
wires.
3.
Loosely attach the anti-tilt bracket with the two screws supplied.
4.
Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can
engage in the slot on the cooker's back, as shown in fig. 8.8.
5.
Tighten the screws attaching the anti-tilt bracket.
6.
Push the cooker against the wall so that the anti-tilt bracket is fully inserted in the slot
on the cooker's back.
0
+ 25
Fig. 8.8
36
min 210 mm
max 235 mm
(depending on feet regulation)
Hide quick links:
Advertisement
Table of Contents
