DeLonghi DSR 905-DF User & Installation Instructions Manual page 34

BACKGUARD
Before installing
assemble the backguard "C" (fig.
8.2).
• The backguard "C" can be
found packed at the rear of the
cooker.
• Before assembling remove any
protective film/adhesive tape.
• Remove the two spacers "A"
and the screw "B" from the rear
of the cooktop.
• Assemble the backguard as
shown in figure 8.2 and fix it by
screwing the central screw "B"
and the spacers "A".
FITTING THE ADJUSTABLE
FEET
The adjustable feet must be fitted to
the base of the cooker before use
(fig. 8.3).
Rest the rear of the cooker an a
piece of the polystyrene packaging
exposing the base for the fitting of
the feet.
LEVELLING THE COOKER
The cooker may be levelled by
screwing the lower ends of the feet
IN or OUT (fig. 8.4)
34
the cooker,
C
A
B
Fig. 8.2
Fig. 8.3
Fig. 8.4