Configuring Tcp/Ip In Windows Vista; Verifying The Ip Address For Windows Xp Or Windows Vista - Motorola DIGITAL VOICE MODEM SBV5122 Installation Manual

Configuring TCP/IP in Windows Vista

1. Click Start.
2. Right click on Network.
3. Scroll down to Properties.
4. Click Manage network connections.
5. Right-click on the appropriate (if more than one listing) Local Area Connection.
6. Click Properties. Vista may prompt you for permission to continue – Click Continue.
7. Select Internet Protocol Version4 (TCP/IPv4) and click Properties.
8. Verify that the Obtain an IP address automatically and Obtain DNS server address
automatically options are selected.
9. Click Advanced. Use the table below to verify the Advanced TCP/IP Settings:
IP Settings Tab
DHCP Enabled listed
IP address box
Default gateways box
is empty
Automatic metric is
selected
10. Click OK.
11. Click Alternate Configuration and verify that Automatic private IP address is selected.
12. Click OK. Vista prompts you to restart your computer.

Verifying the IP Address for Windows XP or Windows Vista

Windows XP
1. Click Start.
2. Select Run.
3. Type cmd and click OK.
4. Type ipconfig and press ENTER to display your IP configuration.
SBV5122U Cabling Instructions • Connecting to the Internet
SBV5122 Digital Voice Modem • Installation Manual
568756-001-b
DNS Tab
DNS server addresses box is empty
Append primary and connection specific DNS suffixes
is selected
Append parent suffixes of the primary DNS suffix is
checked
Register this connection's addresses in DNS is checked
Append these DNS suffixes (in order) is not selected
9
B
WINS Tab
WINS addresses box
is empty
Enable LMHOSTS
lookup is checked
Default: Use
NetBIOS setting
from the DHCP
server is selected