The Idp General Screen; Figure 342 Anti-X > Idp > General; Table 147 Anti-X > Idp > General - ZyXEL Communications ZyWALL 1050 User Manual

30.2 The IDP General Screen

Click Anti-X > IDP > General to open this screen. Use this screen to turn IDP on or off, bind
IDP profiles to traffic directions, and view registration and signature information.
You must register in order to use packet inspection signatures. See the
Registration screens.
If you try to enable IDP when the IDP service has not yet been registered, a warning screen
displays and IDP is not enabled.
Figure 342 Anti-X > IDP > General
The following table describes the screens in this screen.
Table 147 Anti-X > IDP > General
LABEL
General Settings
Enable Signature
Detection
Policies
Priority
ZyWALL 1050 User's Guide
DESCRIPTION
You must register for IDP service in order to use packet inspection signatures.
If you don't have a standard license, you can register for a once-off trial one.
Use this list to specify which IDP profile the ZyWALL uses for traffic flowing in a
specific direction.
IDP policies are applied in order of priority.
Chapter 30 IDP
455