Active Torque Control 4Wd System - Toyota 2007 Rav4 Owner's Manual

(h) If you cannot shift the selector le-
ver out of "P" position
If you cannot shift the selector lever from
the "P" position even though the brake
pedal is depressed, use the shift lock
override button. For instructions, see "If
you cannot shift automatic transmission
selector lever" on page 372 in Section 4.
148
'07 Rav4_U (L/O 0608)
Active torque control 4WD
system
The active torque control 4WD system
controls the engine torque that is ap-
plied to the rear wheels according to
the driving conditions and road condi-
tions. When the vehicle's driving condi-
tions are stable such as driving straight
ahead, the engine torque is applied to
only the front wheels.
FOUR−WHEEL DRIVE LOCK SWITCH
When the vehicle is driven on loose
surfaces, such as sand, gravel, or deep
snow, or if the vehicle gets stuck,
pushing the four−wheel drive
switch to ensure that the engine torque
is applied to the 4 wheels.
When the four−wheel drive lock switch is
pushed, the four−wheel drive lock indicator
light blinks twice and remains on until the
four−wheel drive lock is canceled.
To cancel the four−wheel drive lock, push
the switch once again and the four−wheel
drive lock indicator light will go off.
2007 RAV4 from July '06 Prod. (ON42621U)
lock