Toyota 2007 Rav4 Owner's Manual page 114

2. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" on
page 85 in this Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
104
'07 Rav4_U (L/O 0608)
—Installation with child
restraint lower anchorages
Lower anchorages for the child restraint
systems complying with the FMVSS225
or CMVSS210.2 specifications
installed in the rear/second seat.
The anchorages are installed in the gap
between the seat cushion and seatback of
both outside rear/second seating position.
Child restraint systems complying with the
FMVSS213 or CMVSS213 specification
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
7th lock
position
CHILD RESTRAINT
INSTALLATION
are
1. Fold down the seatback and back it
to the 1st lock position (most up-
right position) until it
place. Adjust the seatback to the 7th
lock position.
Make sure the seatback is locked secure-
ly.
2007 RAV4 from July '06 Prod. (ON42621U)
1st lock
position
SYSTEM
locks into