Separate The Water Supply Line From The Refrigerator; Remove The Freezer Door - Samsung RH25H5611SR User Manual

2. Separate the water supply line from
the refrigerator
1. Remove one or two water lines, depending on
the model, by pressing each coupler ( 1 ) and
pulling the water lines (2 ) away.
-- (1)
(2)
z2_CAUTION
Do not cut the water line,
Gently separate it from the coupler.
3. Remove the freezer door
A few things to mention first.
+ Make sure that you lift the door straight up so
the hinges are not bent or broken.
+ Be careful not to pinch the water tubing and
wire harness on the door.
+ Place doors on a protected surface to prevent
scratching or damage.
+ Is necessary, have two people disassemble the
doors.
1. With the Freezer door closed, remove the
upper hinge cover ( 1 ) using a screwdriver,
and then disconnect the wires by gently pulling
them apart (2 ).
Be careful not to damage the sensor
harness with the hinge cover.
Remove the hinge bolts ( 3 ) with a 10 mm
Socket Wrench.
Remove the ground screw ( 4 ) by turning it
counter-clockwise.
Take off the upper hinge ( 5 ) in the direction of
the arrow.
Take care that the door does not fall on you.
(4) --2
3. Open the Freezer door, and then remove the
door from the lower hinge ( 6 ) by carefully lifting
it up (7).
(7) --
(6) --
Engl sh --12