Connecting The Water Supply Line To The Refrigerator - Samsung RF28HF Series User Manual

Hide thumbs Also See for RF28HF Series:
Table of Contents

Advertisement

Available languages

Available languages

Connecting
the water supply line to the
refrigerator
There are several items that you need to purchase
to complete this connection.
You may find these items sold as a kit at your local
hardware store.
Use Copper
Tubing
Use Plastic
Tubing
® ¼" copper tubing
® ¼" plastic tubing
® ¼" compression
nut
_ Molded end (Bulb)
(1pc)
® ¼" compression
nut
® Ferrule (2pc)
(1pc)
Refrigerator
_
lastic Tubing
If
(A ....
bled)
Compression
Nut ._..._.
(1/4") (Assembled)
_
Compression
_
Fitting
(Assembled)
""
"
"
Molded
end
(Bulb)
{Not supplied)
i
Compression
nut (B) (1/4")
(Not supplied)
Copper
tubing
or
Plastic
tubing
(B)
(Not supplied)
(Not supplied)
\\\
Household
water
supply
line
Connect the household water line to the
assembled compression fitting.
If you are using copper tubing, slip the
compression nut ( B ) (not supplied) and
ferrule (not supplied) on the copper tubing (not
supplied) as shown.
If you are using plastic tubing ( B ), insert the
molded end (Bulb) of the plastic tubing ( B ) into
the compression fitting.
/_ CAUTION
Do not use without the molded end (Bulb) of the
plastic tubing ( B ).
2. Tighten the compression nut ( B ) onto the
compression fitting.
Do not over-tighten the compression nut ( B ).
Turn the water on and check for any leakage.
If you find water drops or leakage in the
connection areas, turn off the main water
supply. Check the connections and, if
necessary, tighten.
Flush 1 gallon of water through the filter before
drinking or using the water from the refrigerator.
(Flush approximately 6 minutes.)
To flush, press a large glass or cup against the
water dispenser lever.
Fill the glass, empty it into the kitchen sink after
it is filled, and then repeat.
After you turn on the refrigerator, let the ice
maker make ice for 1 to 2 days.
Over that period of time, throw out the first 1 or
2 buckets of ice the freezer makes to ensure all
impurities have been removed from the water
line.
®
Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the
water line, cut off 1/4" of the plastic tubing
to make sure you get a snug, leak-free
connection.
You can test the water line quickly using a
paper cup. Under normal conditions, the
water dispenser can fill a 5.75 oz. (170 cc)
cup in about 10 seconds.
Engl sh - 16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents