Make Calls; Indicator Lights; Audio Tones - Motorola HT820 Start Here

MAKE CALLS

Function
Make a voice dial call
End a call
Receive a call
Reject a call
Redial last call
Answer a second
incoming call
Note: Your HT820 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.

INDICATOR LIGHTS

The indicator light provides information about
your headphone status.
With the Charger Plugged In
Headphone Indicator
On (steady)
Off
With No Charger Plugged In
Headphone Indicator
Off
On (steady)
10 rapid flashes
Slow pulse
To turn off the indicator lights, press both <
and > at the same time. To turn the
indicator lights back on, press both <and
> at the same time.
Action
m
Short press left
button & speak the
name after the tone
m
Short press left
button
m
Short press left
button
m
Long press left
button until ringing
stops. Call ignored.
m
Long press left
button
Press and hold the
Call button (places
first call on hold)
Status
Charging
Charging complete
Status
Power off
Pairing mode
Pairing successful
Connected
MAKE CALLS
Function
Use Call Waiting
Join a 3-way call
(Note: Feature is phone/
network dependent.)
Put an active call on
hold or resume a call
on hold
Mute a call
Unmute a call

AUDIO TONES

The audio tones provide information about your
headphone status.
Audio Tone
Single high tone when
pressing volume button
Five rapid high tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Ring tone
Single high tone
Single low tone
Dual high/low tone
Single high tone
Low to high tone
Two tones
Single tone
CONTINUED
Action
m
Long press left
button, 1st call put
on hold. 2nd call
becomes active.
Press both volume
buttons + -
for approx. 2
seconds at the
same time. Both
calls become active.
m
Long press left
button
Press the volume
buttons + -
at the same time.
Press the volume
buttons + -
at the same time.
Headphone Status
Volume at minimum
or maximum
Low battery
Out of range
Incoming call
Pairing confirmation
Voice activation
Voice tag not
recognized
End call
Phone network
not available
Mute on / off
Power on / off