Advertisement
Quick Links
Start Here > > >
Bluetooth®
Stereo Headphones
CHARGE
1
Your Headphones' Battery
Before using your HT820 for the first time,
charge the headphones for 2 hours:
Charger
Plug the Motorola charger into the
1
headphones. The indicator light turns on
when the battery is charging. When the
headphones' battery is fully charged, the
indicator light turns off.
2
Disconnect the charger.
Note: Headphones do not function while charging.
You can also use a Motorola Original™
Vehicle Power Adapter to charge your
headphones while in your vehicle.
)
A fully charged battery provides
approximately: 14 hrs of music listening, 17
hrs of talk time, or 500 hrs of standby time.
HT820
Insert Charger
Here
Music Button
Indicator
Light
(Right Side)
USE THE HT820
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
You can use your HT820 headphones
simultaneously with a Bluetooth A2DP
enabled audio device and your Bluetooth cell
phones!
Listen to music, hear a beep, and transfer to
take the call on the headphones. Hang up the
call with a push of a button and your music
automically continues playing.
Any Bluetooth
Enabled Audio
o
Device*
Ready to make it work?
- Charge your Headphones for 2 Hours (CHARGE)
- Pair headphones & audio device (PAIR)
- Pair phone & headphones (back side of this guide)
- Listen to music and take calls!
*The Bluetooth Enabled Audio Device must be A2DP compatible
2
PAIR
Before you can use your headphones with a
Bluetooth enabled product, you must pair it
with that product. To pair:
Make sure your headphones are turned off
1
(see Turning On and Off ) and press and
hold the left side Call
seconds until the indicator light turns on and
remains steadily lit.
Call Button with
Indicator Light
(Left Side)
2
Next, put your Bluetooth Enabled audio
device in pairing mode so the devices can
"talk" to each other.
For details about putting Bluetooth
Enabled devices in pairing mode, refer to
the device's User's Guide for directions.
Note: To pair the headphones with your phone, see "Pair
with your Phone," on the reverse side of this guide.
HT820
Bluetooth
Enabled
Phone
m
button for 6
Advertisement
Related Manuals for Motorola HT820
Summary of Contents for Motorola HT820
- Page 1 Start Here > > > HT820 Bluetooth® Stereo Headphones CHARGE Your Headphones' Battery Before using your HT820 for the first time, charge the headphones for 2 hours: Insert Charger Charger Plug the Motorola charger into the headphones. The indicator light turns on when the battery is charging.
-
Page 2: Test And Use
1-800-461-4575 (Canada) 6809496A47-B MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. -
Page 3: Music Controls
Your phone's Bluetooth feature is off by default. So, to use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones: Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. TROUBLESHOOTING Support. - Page 4 When your headphones are successfully paired with your phone, the blue indicator light rapidly flashes and then resumes regular flashing. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. FOR MORE INFORMATION ON USING YOUR MOTOROLA HT820 Visit us at www.hellomoto.com/bluetooth and...
-
Page 5: Make Calls
Press and hold the incoming call Call button (places first call on hold) Note: Your HT820 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.