Secura Key ENTRACOMP 26SA User & Installation Manual page 27

6. Be sure all appropriate wiring has been connected to the
terminal board and then plug the terminal board cable into
the socket on the circuit board (see wiring instructions).
7. Place reader and faceplate assembly against the mounting
plate. Faceplate will hook onto mounting plate by pushing
plate in and then sliding it down.
8. Secure faceplate to mounting plate using the two 4-40
screws.
9. Place faceplate door into door opening and rotate key 90°
clockwise.
FIGURE 8
Secura Key • 23