Paradigm CI Home Series Owner's Manual page 12

SPEAKER CONNECTION
-
+
(2 SPEAKER STEREO SETUP)
L
-
+
Fig. 5b
Two Speakers
TROUBLESHOOTING GUIDE
PROBLEM
No Sound
No Sound from One
or More Speakers
Lack of Bass or
Dislocated Image
(Stereo)
11
ALL MODELS
(2 SPEAKER STEREO SETUP)
L
RECEIVER /
AMPLIFIER
L
H65 SM
L
R
RECEIVER /
AMPLIFIER
R
+ -
- +
Make sure receiver, preamp or amplifier is plugged in and turned on.
Check power outlet at the wall is working. Are headphones plugged
in, or is system on Mute? Re-check all connections.
Check your balance control. Check that all power cords are properly
plugged in and functioning. Swap the Left speaker cable with the
Right speaker cable at the receiver/amplifier end to determine if the
problem is with the speaker or something else (i.e. wiring, amplifier).
One or more speakers may be connected out of phase (their polarity is
reversed). Re-check to ensure that each speaker's cable is connected
with correct polarity: red (+) to red (+) and black (-) to black (-).
R
R
+
-
+
-
Fig. 5c
One Speaker
SOLUTION
Fig. 5a
Wiring for all models
except H65-SM, see below.
H65 SM
(1 SPEAKER STEREO SETUP)
L R
RECEIVER /
AMPLIFIER
R
L
-
+
+ -