Marantz SR7009 Owner's Manual page 279

Contents Connections
n Registering multiple players at the same time
1
Press and hold down the SMART SELECT 1 – 4 and
OPTION until "OK" indicator on the remote control
display is flashing, then release.
Devices to be registered at the
same time
Blu-ray Disc DVD player CD player
player
P P
P
P
P P
NOTE
Depending on the model and year of manufacture of your device, some buttons may
not operate. In this case, try "Registering by entering preset numbers" (v p. 279).
Front panel Display
Playback
Press and hold down
the buttons
SMART SELECT 1 and
OPTION
SMART SELECT 2 and
P
OPTION
SMART SELECT 3 and
P
OPTION
SMART SELECT 4 and
P
OPTION
Rear panel
Settings
o Registering by entering preset numbers
Before starting, confirm the preset number of the device that you want
to register and the buttons that can be registered in the "Preset Code
Table" (v p. 355) in the Appendix.
1
Press and hold down the input source select button
that you want to register the preset code to and SET
until "PRSET" indicator on the remote control display
is flashing, then release.
2
Enter the preset number (4 digits) listed for the device
in the Preset Code Table using the number buttons (0 –
9) on the remote control.
0 Some manufacturers use more than one type of remote control code. Preset
codes to change the number and verify correct operation.
0 If the device does not operate even when the preset code is registered, use the
learning function. Remote codes for different devices can be remembered for use
by the Marantz remote control included with this device. (v p. 285)
NOTE
Depending on the model and year of manufacture of your device, some buttons may
not operate.
279 Remote
Tips Appendix
Index