Audyssey - Marantz SR7009 Owner's Manual

Contents Connections
o Limit
Make a setting for maximum volume.
60 (–20 dB) / 70 (–10 dB) / 80 (0 dB)
Off (Default)
o Power On Level
Define the volume setting that is active when the power is turned on.
Last
(Default):
Mute:
1 – 98 (–79 dB – 18 dB) : The volume is adjusted to the set level.
o Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
–40 dB :
–20 dB :
Front panel Display
Playback
Use the memorized setting from the last
session.
Always use the muting on condition when
power is turned on.
The sound is muted entirely.
The sound is attenuated by 40 dB down.
The sound is attenuated by 20 dB down.
Rear panel
Settings

Audyssey

Set Audyssey MultEQ ® XT32, Audyssey Dynamic EQ
Dynamic Volume ® and Audyssey LFC™. These can be selected after
Audyssey ® Setup has been performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 331).
0 "MultEQ ® XT32", "Dynamic EQ", "Reference Level Offset", "Dynamic Volume",
"Audyssey LFC™", "Containment Amount" and "Audyssey DSX
stored for each input source.
0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ
"Dynamic EQ" and "Dynamic Volume" settings cannot be configured.
0 This cannot be set when the input mode is set to "7.1CH IN".
196 Remote
Tips Appendix
® , Audyssey
® " settings are
Index
® XT32",