Basic Operation - RCA RCR2702 User Manual

Basic operation

Overview
Connect to the mains
Insert the mains wire plug of the unit into mains outlet.
Power on/off
Press the ON/OFF switch button to enter standby status or turn on TV.
Note: The power indicator will turn into red when TV is under standby state.
The power indicator will die when TV is under turn on state.
Non-signal power-off in 5 minutes
In case the unit under blue screen or non-signal screen saver state, TV will be
standby state automatically 5 minutes later, to turn it on, please press power button
on TV.
Change channels
You can change channels by using the PROG /
/ button on the remote control).
Volume UP/DOWN
You can adjust the sound by using VOL /
button on the remote control).
Sleep function
1. Press down SLEEP button on the remote control to display the preset time 120
minutes, 90 minutes, 60 minutes, 30 minutes, the unit will be automatically
turned off when the set time has elapsed.
2. To cancel the time-off function, press the SLEEP button consecutively until dis-
play changes to SLEEP OFF state.
Picture modes
Press PICTURE button on the remote control to select picture modes (MEMORY—
STANDARD—DYNAMIC—MILD), MEMORY status is the picture mode you have
adjusted.
10
button in front of the TV(or the CH
button in front of the TV (or the VOL /