Mercedes-Benz S-Class Coupe Operator's Manual page 134

Windshield wipers
132
Replacing the wiper blades
Moving the wiper arms to a vertical posi-
tion
On vehicles without KEYLESS-GO:
Turn the SmartKey to position 0 in the igni-
X
tion lock ( page 151).
Y
Set the windshield wiper to the ° posi-
X
tion.
Turn the SmartKey to position 1 in the igni-
X
tion lock ( page 151).
Y
As soon as the wiper arms are vertical to
X
the hood, turn the SmartKey to position 0 in
the ignition lock (
Remove the SmartKey.
X
Fold the wiper arms away from the wind-
X
shield until you feel them snap into place.
On vehicles with KEYLESS-GO:
Switch off the engine.
X
Remove your foot from the brake pedal.
X
Set the windshield wipers to position °.
X
Press the Start/Stop button repeatedly
X
until the windshield wiper starts.
When the wiper arms have reached the ver-
X
tical position, press the Start/Stop button
repeatedly until the windshield wipers stop.
Fold the wiper arms away from the wind-
X
shield until you feel them snap into place.
Removing a wiper blade
To bring the wiper blade into position to
X
be removed: hold the wiper arm firmly with
one hand. With the other hand, turn the
page 151).
Y
wiper blade in the direction of arrow :
beyond the point of resistance.
The wiper blade engages in the removal
position with an audible click.
To remove a wiper blade: firmly press
X
release knob ; and pull the wiper blade
upwards =.
Installing the wiper blades
Push the new wiper blade in the direction of
X
arrow : onto the wiper arm until tab ;
engages.
Push the wiper blade out of the removal
X
position in the direction of arrow = beyond
the point of resistance.
The wiper blade disengages with an audible
click and is freely movable again.
Make sure that the wiper blade is seated
X
correctly.
Fold the wiper arm back onto the wind-
X
shield.