Memory Function; Storing Settings - Mercedes-Benz S-Class Coupe Operator's Manual

WARNING
G
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey isn't in the igni-
tion lock.

Storing settings

With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
seat, backrest, head restraint position and
R
contour of the backrest in the lumbar
region
active multicontour seat: side bolsters of
R
the backrest, shoulder of the backrest, con-
tour of the backrest, dynamic function level
seat heating: distribution of the heated sec-
R
tions of the seat cushion and backrest
driver's side: position of the exterior mir-
R
rors on the driver's and front-passenger
sides
position of the head-up display
R

Memory function

Adjust the seat accordingly (
X
On the driver's side, adjust the steering
X
wheel ( page 114) and the exterior mirrors
Y
( page 118).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
Calling up a stored setting
Press and hold the corresponding storage
X
position button 1, 2 or 3 until:
Seat
R
Steering wheel
R
Exterior mirrors
R
Head-up display
R
are in the stored position.
i
If you release the storage position button,
the seat, steering wheel and mirror setting
functions stop immediately. The multicon-
tour seat setting or the 4-way lumbar sup-
port is still carried out.
121
page 108).
Y
Z