Mercedes-Benz S-Class Coupe Operator's Manual page 122

Memory function
120
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 151).
Y
Press button = for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button ; to adjust the
X
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving posi-
tion after approximately ten seconds.
Using the memory button
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M :.
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 151).
Y
Press button = for the exterior mirror on
X
the front-passenger side.
Use adjustment button ; to adjust the
X
exterior mirror to a position that allows you
to see the rear wheel and the curb.
Press memory button M : and one of the
X
arrows on adjustment button ; within
three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
the steps.
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 151).
Y
Adjust the exterior mirror on the front-
X
passenger side using button =.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have disen-
R
gaged reverse gear
if you press button ? for the exterior mir-
R
ror on the driver's side
Memory function
Important safety notes
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.