Vertical And Horizontal Position And Size Specification - Sony TORINITORON HMD-A440 Service Manual

Connect the communication cable of the computer to the connector located on the D board. Run the service software and then follow the instruction.

• Vertical and Horizontal Position and Size Specification

A
b
a
a 1.8 mm
b 1.8 mm
1 1-690-391-21
IBM AT Computer
as a Jig
D-sub mini Din
(9 Pin [female]) (8Pin)
*The parts above (
1
MODE All mode
B
A 352 mm
264 mm
B
2 A-1500-819-A 3 3-702-691-01
Interface Unit Connector Attachment
To BUS CONNECTOR
4 Pin 4 Pin 4 Pin
) are necessary for DAS adjustment.
3
• Focus rough adjustment
1. Receive the mE pattern signal. (black characters on green)
2. Adjust the H FOCUS of the screen corner with Fcous VR in the bottom of
the FBT.
3. Receive the cross-hatch pattern signal .(green line on black)
4. Adjust the V FOCUS of the center and the y-axis with the FOCUS VR in
the top of FBT.
FBT
Focus volume 1 (V)
Focus volume 2 (H)
G2 VR
HMD-A440(E) 3-4