Vertical And Horizontal Position And Size Specifi Cation; Focus Adjustment - Sony Trinitron CPD-G220R Service Manual

3. Adjust the TB Pin with TB Pin VR.
TB Pin Movement
4. Adjust V.SIZE with "VSIZE".
5. Change "CONV_SW" to "0" and "MCR2" to "153".
6. Display crosshatch pattern with red and blue lines and black fi eld.
7. Adjust H.STAT and V.STAT with 4 pole magnet. Use 4 pole magnet,
not "HSTAT" and "VSTAT".
4 Pole Magnet
8. Display crosshatch pattern with white lines and black fi eld.
9. Adjust HMC and VMC with 6 pole magnet.
6 Pole Magnet
10. Display crosshatch pattern with red and blue lines and black fi eld.
11. If necessary, repeat steps 5-8.
12. Change "CONV_SW" to "6".
13. Adjust H.TILT with TLH plate.
TLH Movement
R B
14. Adjust XCV with XCV VR.
XCV Movement
15. Adjust YCH with YCH VR.
YCH Movement
B R
— 10 —
16. Adjust V.TILT with TLV VR.
TLV Movement
17. If necessary, repeat steps 3-14 to make the optimum condition for
the entire screen.
18. Fix 4-pole magnet, 6-pole magnet, TLH plate and XCV VR with
white paint.
Zero Position Neck Ass'y
3-5. VERTICAL AND HORIZONTAL POSITION
AND SIZE SPECIFICATION

3-6. FOCUS ADJUSTMENT

1. Adjust focus (V) and focus (H) for optimum focus.
CPD-G220R/G220S
Focus (V)
Focus (H)