Time And Date - Magellan MG-6060 Reference And Installation Manual

When you are done the next menu option will appear. Press
[ NEXT ] until you see the "Passwords" menu or press the [8] key
to immediately access the "Passwords" menu.
6.Signal Strength
Press [ EXIT ] when you are done.
7.Passwords
When you are done the next menu option will appear. Press
[ EXIT ].
For more in-depth programming of the console's
passwords, see User Codes on page 14 and WinLoad
Software Settings on page 38.
Paradox Magellan Systems
1. From the "Signal Strength" menu,
press [ OK ].
2. The Magellan will begin testing
the noice level and signal
strength of all assigned wireless
transmitters. Press [ NEXT
navigate through the various
tests.
1. From the "Passwords" menu,
press [ OK ].
2. Select which password(s) or
code(s) you wish to program by
pressing [ NEXT ] and press [
when the desired password
appears. The following
passwords can be programmed:
- Installer code
- Maintenance code
- Panel ID
- PC Password

8.Time and Date

] to
Deleting Zones
OK ]
When you are done the next menu option will appear. Press
[ NEXT ] until you see the "System Test" menu or press the
to immediately access the "System Test" menu.
For more in-depth programming of the console's zones, see
Zone Programming on page 15 and Wireless Programming on
page 19.
1. Press the [ MENU ] key.
2. Press [ NEXT ] until you reach the
"Time and Date" menu and press
[ OK ] or press the [3] key to
access the "Time and Date"
menu.
3. Select the time format (12Hr-
clock or 24Hr-clock) and then
program the time. Press [
when done.Program the date by
entering the 4-digit year first,
followed by the 2-digit month and
then the 2-digit day. Press [
when done.
1. From the "Zone Profile" menu,
press [ OK ].
2. Select which zone you wish to
delete by pressing [ NEXT
press [ OK ] when the desired zone
number appears.
3. Press [ YES ].
4. Press [ YES ]. To delete another
zone, press [ YES ] and then repeat
steps 2 to 4.
OK ]
OK ]
] and
key
[5]
5