Setting The Ink Cartridge To Be Used - Canon MG3500 Series Online Manual

Setting the Ink Cartridge to be Used

This feature enables you to specify the most appropriate FINE cartridge among installed
cartridges according to an intended use.
When one of the FINE cartridges becomes empty and cannot be replaced immediately by a
new one, you can specify the other FINE cartridge that still has ink and continue printing.
The procedure for specifying the FINE cartridge is as follows:
1. Select Ink Cartridge Settings from the pop-up menu on the Canon IJ
Printer Utility
2. Select the FINE cartridge to be used
Select the FINE cartridge you use for printing, and click Apply.
3. Complete the setup
Click OK when the confirmation message appears.
The specified FINE cartridge will be used from the next printing.
Important
When the following settings are specified, Black Only does not function because the
machine uses the color FINE cartridge to print documents.
• A paper type other than Plain Paper, Envelope, Hagaki A, or Hagaki is selected
from the Media Type of the Quality & Media on the pop-up menu in the Print dialog.
• "XXX (borderless)" is selected from the Paper Size pop-up menu in the Print dialog.
Do not detach the FINE cartridge that is not in use. Printing cannot be performed while
either FINE cartridge is detached.
137