Canon MG3500 Series Online Manual page 143

plain paper printing, select the Do not show again check box in the displayed
dialog.
To display the guide messages again, display the Canon IJ Printer Utility pop-
up menu, select Custom Settings, and then check the How to load paper
check box.
Important
With Mac OS X v10.8 or Mac OS X v10.7, you cannot use Display Guide
Message.
Therefore, if you check the Do not show again check box when a guide
message is displayed before printing starts, this will stop any more guide
messages from being displayed.
Prevent paper abrasion
The machine can increase the gap between the print head and the paper during high-
density printing to prevent paper abrasion.
Check this check box to prevent paper abrasion.
Prevent paper double-feed
Select this check box only if the machine is feeding multiple sheets of plain paper at
the same time.
Important
Using this function slows down the print speed.
Align heads manually
Usually, the Print Head Alignment function of Test Print on the pop-up menu in the
Canon IJ Printer Utility is set to automatic head alignment, but you can change it to
manual head alignment.
If the printing results are unsatisfactory even after you execute automatic head
alignment, execute manual head
Check this check box to perform the manual head alignment. Uncheck this check box
to perform the automatic head alignment.
Detect the paper width when printing from computer
When you print from the computer, this function identifies the paper that was loaded
into this machine.
When the paper width detected by the machine differ from the width of the paper
specified in Paper Size on the Print dialog, a message is displayed.
To use paper width detection when printing from the computer, select the check box.
alignment.
143