Getting Started
Charging the headphones and remote control unit
The Easi-Ears headphones and remote control unit are fully rechargeable. These
rechargeable batteries are however not user replaceable.
It's advised that the headphones and remote control unit are fully charged before use.
To do this ensure that the headphones and remote control unit are properly docked in
the docking station and plug the docking station into a mains power supply.
It will take approx 16 hours to fully charge the set.
When the headphones require more charge the red light will flash slowly. You will know
when the remote control unit needs more charge because a low battery symbol will show.
The red LED light on the headphones and the remote control unit will flash slowly during
charging and will stay on when fully charged.
Installing the software
The Easi-Ears software enables you to manage the audio tracks you want on each
headphone – uploading the same content to all of them, or differentiating each
headset. More on using the software on p.10
To install the Easi-Ears software: ......
Insert the CD into your PC and the installation will begin. If it doesn't start,
n
browse to the CD and click on setup.exe.
There are no options to select during installation, simply press "Next" to
n
progress from one screen to the next one.
When installation is complete click "Finish", and the Easi-Ears application will
n
start
4