Table of Contents
Advertisement
Easi-Ears
®
Connecting the Headphones
Ensure that the docking station has power
and connect the USB lead to your PC.
When you dock the headphones or
remote control unit in your docking
station they will appear in the software as
enabled devices, and the audio contents
will be shown. See Fig 2 - the orange
headphones have been connected, but
all other devices are not connected.
Figure 2
Copying Files
To copy files to any of the connected devices, you can drag an MP3 file from any open
window on your PC (not just within the Easi-Ears software) to the device in the Easi-Ears
software that you require. You can also drag and drop from any list to any other list
within the software, so it is simple to copy a file from one device to another, from the
library to a device or from a device (e.g. remote control unit) to the library.
If you right-click on a file, a menu will pop-up allowing you to copy, paste, rename,
delete and play files directly.
Hold down the 'Shift' or 'Ctrl' keys to select multiple files to copy, paste or delete.
At the end of the copy process, the software will set the headphones to play
continuously if the "Continuous play" checkbox in the Teacher Menu is ticked. Otherwise,
the headphones will be set to play one track then stop.
See "Copying Playlist to Devices" (p.14) for a quick and easy way to create the same
content on several devices simultaneously.
Headphone capacity
The headphones and remote control unit contain 256Mb of Flash memory, which is
enough to store more than 2 hours of MP3 recordings.
11
Advertisement
Table of Contents
