Playing Mp3 Files; Transmitting Audio To The Headphones; Controlling The Headphones - TTS Easi-Ears User Manual

Playing MP3 Files

Source switch
Ensure the Source switch is set to MP3 and the Control switch is set to
n
LOCAL. Press and hold the
Use the
n
to start playing
Press the
n

Transmitting Audio to the Headphones

Ensure the Control switch is set to LOCAL
n
Select the source you want to transmit from: external audio device ("
n
LINE-IN"), external microphone ("MIC") or local MP3 file ("MP3") on the
remote
If using a local MP3 file, ensure that it is playing
n
Press the
n
Press the
n
The transmission will be sent to all of the headsets in use. The audio cannot be
transmitted to individual headsets.
Transmission range
The range between the headphones and remote control unit is about 12m (depending
on the environment) to receive a transmission. If used outdoors or in rooms with high
ceilings, the transmission will only be line of sight.

Controlling the Headphones

Ensure the Control switch is set to REMOTE
n
Use the
n
the headphones. Note that the same track number will be played on the
headphones, even if the content of that track is not the same as on the
remote control unit. When controlling the headphones, it is usually best to
ensure that the same tracks are on the headphones in the same order as
8
and buttons to select the required track then press
button again to pause the track
button to start transmitting. The Green LED will light up
button again to stop transmitting
and buttons to select the track you want to play on
button until the LCD display turns on
Control switch