Getting Started; Charging The Headphones And Remote Control Unit; Installing The Software - TTS Easi-Ears User Manual

Getting Started

Charging the headphones and remote control unit

The Easi-Ears headphones and remote control unit are fully rechargeable. These rechargeable
batteries are however not user replaceable.
It's advised that the headphones and remote control unit are fully charged before use. To do this
ensure that the headphones and remote control unit are properly docked in the docking station and
plug the docking station into a mains power supply.
It will take approx 16 hours to fully charge the set.
When the headphones require more charge the red light will flash slowly. You will know when the
remote control unit needs more charge because a low battery symbol will show.
The red LED light on the headphones and the remote control unit will flash slowly during charging and
will stay on when fully charged.

Installing the software

The Easi-Ears software enables you to manage the audio tracks you want on each headphone –
uploading the same content to all of them, or differentiating each headset. More on using the
software on p.10
To install the Easi-Ears software: ......
• Insert the CD into your PC and the installation will begin. If it doesn't start, browse to the CD
and click on setup.exe.
• There are no options to select during installation, simply press "Next" to progress from one
screen to the next one.
• When installation is complete click "Finish", and the Easi-Ears application will start
4
Primary ICT Ltd - www.primaryict.co.uk