Table of Contents
Advertisement
The coloured LEDs on the headphones
indicate:
Red light is ON indicates normal
n
use. It flashes slowly in standby
mode and when charging
Green light is ON when playing It
n
flashes when paused
Amber light is ON when the remote
n
control unit is transmitting to the
headphones (more on p.7)
Press
n
it if already playing
Press the
n
previous or next track
To adjust the volume on the headphones use
n
the thumbwheel on the side of the headphones
near the USB socket
To charge the headphones place them firmly
n
into the docking station, ensuring that the
docking station is connected to power. The red
light will flash slowly during charging and will
stay on when fully charged.
The headphones are designed to be extremely
n
robust and no damage is caused when the headband is twisted.
Replacing the Ear Pads
The foam pads can be removed and replaced with new ones. To order new foam pads
call 0800 318 686 or visit www.tts-shopping.com/easiears
Please note that what is removed and replaced is the complete earpiece assembly
including the plastic clips and the material that holds the foam on.
To remove: Grip the ear pad firmly and rotate anticlockwise 1/8th turn. The
n
whole ear pad assembly can then be removed
To replace: Locate the lugs on the ear pad assembly into the headphones,
n
and then rotate clockwise 1/8th turn until it clicks.
6
to play the current track, or to pause
or
buttons to move to the
Rewind
Play/pause
Forward
Advertisement
Table of Contents
