Operation; Using The Ventilator - Master MAC-708-SF User's Manual & Operating Instructions

using The Ventilator:

1. Remove the ventilator from packaging. Be
certain no packaging materials are blocking
the air inlet (rear) or air outlet (front).
2. Place ventilator on level ground.
3. Attach ducting (Sold Separately) securely
using the tie down strap. (Figure 2)
Figure 2
4. Connect ventilator to a grounded power outlet
with an approved power rating using a 14
AWG or higher gauge power cord.
5. Push power switch to the "ON" position.
(Figure 3)
Figure 3
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE VENTILATOR UNATTENDED WHILE
OPERATING OR WHILE CONNECTED TO A POWER SOURCE

Operation

Tie Down Strap
Moisture Control:
This ventilator can be used to remove moisture
from an area.
NOTE: This ventilator will not prevent mold or
mildew formation. To prevent mold or mildew
formation, this ventilator should be used in unison
with a dehumidifier.
Ventilation:
This ventilator can move large quantities of air
rapidly to provide ventilation and cooling.
Stacking:
The housing of these ventilators are designed to
stack one ventilator on top of another. (Figure 4)
NOTE THE MAC-708-SF DOES NOT STACK.
ALWAYS be certain the ventilator is on level
ground before stacking.
ALWAYS be certain ventilators are stacked
properly and securely before operating.
NEVER stack more than two (2) ventilators in a
single stack.
RISK OF INjURY! DO NOT
WARNING
MOVE VENTIlATOR WHIlE
IT IS OPERATING!
Stacked
Ventilators
(2 Maximum)
Figure 4
Industrial Steel Fan Ventilator User's Manual
4