Sequence Of The Vcom Adjustment - LG 42LB5800 Service Manual

Standard Repair Process Detail Technical Manual
symptom
LCD TV
1. Case
■ LCD module change ■ LCD d l h
■ T-Con board change
2. Equipment
■ Service Remote controller ■ Service Remote controller
3. Adjust sequence
■ Press the 'adj' key
■ select V-COM
■ As pushing the right or the left button on the remote controller, And find the V-COM value Which is no or ■ A hi th i ht
minimized the Flicker.
(If there is no flicker at default value, Press the exit key and finish the VCOM adjustment.)
■ Push the OK key to store the value. Then the message "Saving OK" is pop.
■ Press the exit key to finish V-COM adjustment. y
Copyright ⓒ 2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Error
D. VCOM Adjustment D VCOM Adjustment
t
Content

Sequence of the Vcom adjustment

th l ft b tt th t
j
t ll A d fi d th V COM
31 / 97
Established
2014.1.2 2014 1 2
date
Revised
date
l Whi h i
A28
LGE Internal Use Only