Tool Option Setting & Inspection Per Countries; Magic Motion Remote Controller Check; Wi-Fi Mac Address Check; Using Rs232 Command - LG 42LB5800 Service Manual

5.2. Tool Option setting & Inspection per
countries
5.2.1. Overview
(1) Tool option selection is only done for models in Non-USA
North America due to rating
(2) Applied model: LA46B Chassis applied to CANADA and
MEXICO
5.2.2. Country Group selection
(1) Press ADJ key on the Adj. R/C, and then select Country
Group Menu
(2) Depending on destination, select US, then on the lower
Country option, select US, CA, MX.
Selection is done using +, - KEY
5.2.3. Tool Option inspection
▪ Press Adj. key on the Adj. R/C, then select Tool option
Model Tool 1 Tool 2
32LB580B-UG(Sharp) 6769 13329
32LB580B-UG(LGD) 625 13329
32LB5800-UG 625 13329
39LB5800-UG 14963 13329
42LB5800-UG(LGD) 628 13329
42LB5800-UG(AUO) 4724 13329
47LB5800-UG 629 13329
50LB5800-UG(AUO) 4726 13329
50LB5800-UG(INX) 14966 13329
55LB5800-UG(LGD) 631 13329
55LB5800-UA(AUO) 4727 13329
47LB6100-UG 677 13329
50LB6100-UG(LGD) 678 13329
50LB6100-UG(AUO) 4774 13329
50LB6100-UG(INX) 15014 13329
55LB6100-UG(LGD) 679 13329
55LB6100-UG(AUO) 4775 13329
60LB6100-UG 39592 13329
65LB6190-UD 34467 13329
※ Tool option can be reconstructed by Software
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Tool 3 Tool 4 Tool 5 Tool 6 Tool 7
33152 64070 4566 1353 41771
33152 64070 4310 1354 41771
33152 64070 4310 1353 41771
33152 64070 4566 1353 41771
33152 64070 4310 1433 41771
33152 64070 4310 1353 41771
33152 64070 4310 1353 41771
33152 64070 4310 1353 41771
33152 64070 4310 1353 41771
33152 64070 4310 1402 41771
33152 64070 4310 1353 41771
33152 64070 12502 1353 41771
33152 64070 12502 1353 41771
33152 64070 12502 1353 41771
33152 64070 12502 1353 41771
33152 64070 12502 1402 41771
33152 64070 12502 1353 41771
33152 64070 12502 1353 41771
33152 64070 12502 1353 41771

5.3. Magic Motion remote controller Check

5.3.1. Test equipment
▪ RF-remote controller for check, IR-KEY-CODE remote
controller.
▪ Check AA battery before test. A recommendation is that a
tester change battery every lots.
5.3.2. Test
(1) Make pairing with TV set by pressing "Start key(Wheel
key)" on RCU.
(2) Check a cursor on screen by pressing 'Wheel key" of RCU
(3) Stop paring with TV set by pressing "Back+ Home" key of
RCU
5.3.3. Applied models
Chassis Model Name
LA46B 32LB580B-UG
32/39/42/47/50/55LB5800-
47/50/55/60LB6100-UG
※ Dongle Model : An USB dongle-type receiver will be
supplied in form of accessory. So this
pairing test is not necessary for these
models

5.4. Wi-Fi MAC Address Check

5.4.1. Using RS232 Command

Command
Transmission [A][l][][Set ID][][20][Cr]
5.4.2. Check the menu on in-start
- 14 -
Magic RF receiver
Dongle
UG
Set ACK
[O][K][x] or [N][G]
LGE Internal Use Only