Motorola MOTONAV TN20 Installation Instructions page 3

4 GPS Navigation Device Upgrade Instructions
1. Ensure the MOTONAV GPS Navigation Device is fully charged.
2. Power-down the MOTONAV Device by holding the power button for at least 8 seconds,
until the charging LED indicator blinks.
3. Insert the SD memory card into the SD card slot of the MOTONAV GPS Navigation
Device.
Note: This step is not necessary if the memory card is already installed in your
MOTONAV GPS Navigation Device (option 3 was selected from Step 2 above).
4. Power-on the MOTONAV GPS Navigation Device. The software upgrade will begin
automatically. Select "Yes to All" if prompted.
5. The full upgrade process can take up to 15 minutes.
6. When the software upgrade is complete, the MOTONAV GPS navigation device will
automatically transition to either the "Map" screen or the "Language Settings" screen,
depending on the state of your device.
7. Remove the SD memory card from your MOTONAV GPS navigation device.
The software upgrade procedure is now complete. Your MOTONAV GPS navigation device
is ready for use.
If you experience any problems with this upgrade procedure, please contact Motorola
Consumer Care at 1.866.289.6686.
3