Recommended Service Tools; Table 4-1. Recommended Service Tools - Motorola APX 5000 Service Manual

4-2
4.2

Recommended Service Tools

Table 4-1 lists recommended service tools that can be used for PC board repairs at the component
level. For listings of additional service tools, service aids, and test equipment that are recommended
for all levels of service, refer to the APX 5000/APX 6000/APX 6000XE/SRX2200 basic service
manual (see "Related Publications" on page
Motorola
Part Number
1110027B23 Speaker Module Seal Lubricant
5880384G68 SMA to BNC Adapter
66009254001 APX 5000/ APX 6000 Battery
Eliminator
66009255001 Grille Eliminator
66009256001 Volume Potentiometer Outer
Spanner Bit
66009258001 Antenna Spanner Bit
66009259001 Vacuum Adapter
66009260001 Board Analysis Fixture
NLN9839_ Vacuum Pump Kit
NTN4265_ Pressure Pump Kit
DVN4233_ Customer Programming Software
(CPS) and Tuner Software
PMKN4012_ Programming Cable
PMKN4013_ Programming/Service Cable
RLN4510_ 7.5 Volt Universal Battery
Eliminator
RLN4460_ Portable Test Set

Table 4-1. Recommended Service Tools

Description
Troubleshooting Procedures: Recommended Service Tools
ix).
Application
Used to ensure good sealing of the Speaker Module to the
Main Chassis.
Adapts radio's antenna port to BNC cabling of test
equipment.
Used in place of battery to connect radio to an external
power supply. Requires RLN4510_.
Special tool used when pressure testing the radio.
Replaces the radio grille to seal the port vent.
Used to assemble and disassemble the spanner nut on the
volume potentiometer.
Used to assemble and disassemble the spanner nut on the
antenna bushing.
Submersible radios only. Connects the vacuum/pressure
hose to the radio.
Special fixture that allows radio's internal board to be
mounted externally. Provides easy access to electronic
circuits, required for board-level troubleshooting.
Submersible radios only. Vacuum pump with gauge and
vacuum hose. Requires 66009259001 Adapter Kit.
Submersible radios only. Pressure pump with gauge and
pressure hose. Requires 66009259001 Adapter Kit.
CPS allows customer-specific programming of modes and
features. Tuner software required to perform alignment of
radio parameters.
Used to program the radio through Customer
Programming Software and Tuner Software.
Used to program and service the radio through Customer
Programming Software and Tuner Software.
Used in conjunction with the 66009254001 to adjust the
supply voltage to 7.5 Vdc. Allows a multimeter to be
attached for monitoring and adjusting voltage and current
levels.
Used for radio performance checks. Connects to radio's
universal connector and allows remote switching and
signal injection/outputs for test equipment measurements.