Reset Procedure; Partial Reset; User Reset; Installer Reset - Danfoss TP7001 Range Installation Manual

Electronic 7 day programmable room thermostat

Hide thumbs Also See for TP7001 Range:

Table of Contents

5.0 How to Reset the Unit

Partial reset is used if the display freezes for any reason.

1. Press and release the RESET button.

This does not reset any programmes or the time or date. It will

simply restore operation in the unlikely event the unit has become

unresponsive.

5.2 User full reset

1. Hold down the PROG button

2. Press and release the RESET button

This resets event times and any User Advanced Programme settings,

but does not reset time or date.

5.3 Installer full reset

1. Press and hold V and PROG for approx. 3 seconds to enter User

Advanced Programming

2. Press and hold V, Λ and PROG for approx. 5 seconds to enter

Installer Advanced Programming

3. Hold down the PROG button

4. Press and release the RESET button

This resets event times and all User and Installer Advanced

Programming settings and returns them to factory settings, however,

time, date and service due date are not reset.

Danfoss Heating

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the TP7001 Range and is the answer not in the manual?