Changing The Display - Sony MHC-GZR999DA Operating Instructions Manual

To cancel the timer
1
Press TIMER MENU.
"TIMER SELECT?" flashes in the
display.
2
Press ENTER.
3
Press  or  repeatedly to select
"TIMER OFF. "
4
Press ENTER.
Notes
 The Play Timer and Rec Timer will not be
activated if the system is turned on or if
"STANDBY" flashes in the display. Be sure
to turn off the system at least 120 seconds
before the preset time.
 The volume is reduced to minimum during
Rec Timer.
 The track numbers are automatically marked
when you record more than 60 minutes.
Tips
 The Play Timer setting remains as long as the
setting is not canceled manually.
 The Rec Timer is canceled automatically after
the Rec Timer has been activated.
98
GB

Changing the display

Turning off the display
Power Saving Mode

The demonstration display and the clock
display can be turned off to minimize
the amount of power consumed during
standby mode (Power Saving Mode).
Press DISPLAY repeatedly while the
system is turned off.

Demonstration
1)
No display (Power Saving Mode) 
 Demonstration  ...
Clock
2)
The display changes and the indicators flash
1)
even when the system is turned off.
The clock display automatically turns to
2)
Power Saving Mode after 8 seconds.
Note
You cannot perform the following operations
during Power Saving Mode:
 Setting the clock.
 Changing the AM tuning interval.