Table of Contents
Advertisement
Changing the format of the
video signal output from
COMPONENT VIDEO OUT jacks
Progressive is a method for displaying
TV images that reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
1
Press FUNCTION +/ repeatedly
to select "DVD" (or press DVD on
the unit).
2
Press
is stopped.
The Control Menu appears on the TV
screen.
3
Press or repeatedly to
select
ENTER.
The options for "SETUP" appear.
4
Press or repeatedly to select
"CUSTOM, " then press ENTER.
The Setup Menu appears.
GB
DISPLAY when playback
(SETUP), then press
5
Press or repeatedly to
select "VIDEO SETUP, " then press
ENTER.
The options for "VIDEO SETUP"
appear.
6
Press or repeatedly to select
"PROGRESSIVE (COMPONENT
OUT), " then press ENTER.
The options for "PROGRESSIVE
(COMPONENT OUT)" appear.
7
Press or repeatedly to select
the desired setting, then press
ENTER.
The default setting is underlined.
OFF: Outputs interlace signals.
Select this setting when:
your TV does not accept
progressive signals.
your TV is connected to jacks
other than the COMPONENT
VIDEO OUT jacks.
ON: Outputs progressive signals.
Select this setting when:
your TV accepts progressive
signals.
your TV is connected to the
COMPONENT VIDEO OUT
jacks.
When you select "ON, " the
confirmation display appears. Follow
the steps below.
Hide quick links:
Advertisement
Table of Contents
