1060 IO board
For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 35
Figure 6. Removal steps of IO board
Detach the LED board connector in the directions shown by arrows 1 and 2.
3
M2.0 × 2.5 mm, Phillips head, nylok-coated (1)
3
IO to U case (FLEX 3-1580)
Remove the LED board in the direction shown by arrow 4.
When installing: Make sure that the connector is attached firmly.
FLEX 3-1480/FLEX 3-1580
Color
Torque
Black
2.0 kgf*cm
Black
2.0 kgf*cm
43