Lenovo ideapad 330S-15IKB GTX1050 Hardware Maintenance Manual
1060 IO board and RTC battery
For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
Figure 6. Removal steps of IO board and RTC battery
Detach the connector in the directions shown by arrows 1 and 2. Remove the
screws 3.
When installing: Make sure that the connector is attached firmly.
Remove the I/O board 4.
40
Step
Screw (quantity)
M2.0 x 3.0 mm, Phillips-head, nylok-coated (2)
3
I/O board
4
Color
Torque
Black
1.0~1.5 kgf*cm