Lenovo V110-14IAP/V110-14AST/V110-15ISK/V110-15IAP/V110-15AST
1060 IO board
For access, remove these FRUs in order:
• "1010 Optical drive" on page 34
• "1020 Base cover" on page 35
• "1030 Battery pack" on page 38
• "1040 Hard disk drive" on page 40
• "1050 Speaker" on page 43
Figure 6. Removal steps of IO board
Remove the screw 1.
a
Step
Screw (quantity)
M2 × 3 mm, Phillips head, nylok-coated (1)
3
IO BOARD TO UPPER
Remove the IO board in the direction shown by arrow 2.
When installing: Make sure that the connector is attached firmly.
b
Color
Torque
Black
1.85+/-0.15 kgf/cm
45